Armed Service About Us Contact Us Products News
    First Aid Kit
    Dead Body Bag
    Medical Accessory
    Medical Equipment
 
 Medical - Dead Body Bag  
 
         
  Dead Body Bag   Dead Body Bag      
 

 

DEAD BODY BAG MATERIAL TENDER TECHNICAL SPECIFICATIONS :

   
 

Fabric :

1
 
The material of dead body bag should be 1000D polyester and the weight of 1 sqm will be 435 GR (tolerance -25 gr) . Both side of material should be covered PVC, acrylic or polyurethane
2
 
The weaving shape will be 1/1 plane weaving.
3
 
At the both way, break away maintainability will be minimum 1000 Newton.
4
 
At the both way, tear maintainability will be minimum 150 NEWTON
5
 
water tightness will be 2000 MM
6
 
According to cold situations; dissapperance of the deformation, cleavage and breaking when brought to room temperature from waited at -40 Celcius temperature at 6 hours.
7
 
According to heat situation; dissapperance of the deformation, adhesion and hanging when brought to room temperature from waited at 70 Celcius temperature at 24 hours.
8
 
Dimensional Constancy; the bag will be waited at 70 Celcius temperature at 20 hours and shrinkage should be maximum 2%, prolongation should be maximum 1%.
10
 
2,5 cm holders will be 100% polyester, 1 meter weight will be minimum 33 gr, width will be minimum 26 mm, break away maintainability will be 6500 Newton (650 kg)
11
 
2 cm piping , 1 meter weight will be min. 10 gr, width will be min. 21 mm, break away maintainability will be 1000 Newton (100 kg)
12
 
Sewing strip will be 100% polyester
 
 

Sewing :

13
 
The color of dead Body Bag will be black
14
 
Balecloth, Colon will be 2,5 CM width, piping will be 2 CM, the tones difference at color of zipper will not be accepted.
15
 
The 4 edge of the rectangle will have 2 cm piping width.
16
 
Like at drawing -1; the zipper will be applied like drawing and either beginning or finishing point of zipper, there will be sewed a little bit balecloths.
17
 
Like at drawing -1 and white sample-2; transparent plastic pocket will be sewed with 3 edges
18
 
Like at drawing -2; The colons width 2,5 CM will be 8 holders to carry.
19
 
Each carrying holders will have the length of 45 cm as total.
   
At the inside of the bag, the sewing bands of the colons will not be apperaed from the inside so the inside od the bag will be covered again with the same material. So the undercoat will be the same balecloth and the bag will be 2 layers. (Very important to prevent any leakage from the inside)
 

 

 

   
  
2001 @ Shanghai Multi-med Union Co.,Ltd. China Hua Run Group)All Rights Reserved